Cisco 300-430 Exam Dumps

For CMX high availability deployment, enabling the virtual IP address of the primary server is critical. This virtual IP facilitates seamless failover to the secondary server without requiring DNS updates or manual intervention, ensuring uninterrupted service during primary server outages.Reference:= ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

https://www.cisco.com/c/en/us/td/docs/wireless/mse/10-6/cmx_config/b_cg_cmx106/managing_cisco_cmx_system_settings.html#task_35253AFE18234DDA8C6E04C297D725F5:~:text=Primary%20and%20Secondary.-,Enabling%20High%20Availability%20for%20Cisco%20CMX%20Using%20the%20Web%20UI,-Procedure

When a Cisco Wireless LAN Controller (WLC) is added to Cisco ISE as a network device for authentication purposes, it is crucial to verify the shared secret configured within the network device settings. The shared secret is used to secure communication between the WLC and ISE, ensuring that the authentication messages are encrypted and authenticated. If the shared secret does not match on both the WLC and ISE, the authentication will fail.Reference: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

VLAN-based central switching is the feature that meets the requirements stated. With this feature, when a subnet assigned to a client is available at the remote site, the traffic is offloaded locally. If the subnet is not available, the traffic is tunneled back to the Wireless LAN Controller (WLC). This setup allows for dynamic assignment of clients to specific IP subnets using Cisco Identity-Based Networking Services with ISE.Reference: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The correct command set for configuring a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port is Option C:

config terminal

wireless profile policy [policy name]

no central switching

end

This configuration disables central switching, which means that client traffic will be locally switched at the access point level rather than being sent through the controller. This is useful in scenarios where local switching is preferred due to reasons such as reducing latency or conserving bandwidth on WAN links.Reference:= ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )