2026 Actual Cisco 300-410 Dumps, Updated Exam Questions for Guaranteed Pass

300-410 free sample questions and answers

Cisco 300-410 practice quiz with correct answers for search indexing.

1. Question 1

   A switch has been configured to provide DHCP relay on VLAN 100 to a server with an IP address of 10.1.1.1. The DHCP server is sending syslog reports of multiple TFTP requests that also originate from the switch. As a result, the server CPU exceeded a configured threshold. Which action does the network administrator recommend to bring the server CPU threshold down?

   AConfigure the switch with an access list on VLAN100 to deny TFTP.
   

   BConfigure the switch with a VACL on VLAN100 to deny TFTP.
   

   CConfigure the switch with ip forward-protocol udp 67 globally.
   

   DConfigure the switch with no ip forward-protocol udp 69 on VLAN100.
   

   Correct answer: D

   
   

2. Question 2

   Refer to the exhibit.

   

   Refer to the exhibit. An engineer must configure a per VRF for TACACS+ for company

   AWhich configuration on RTG-1 accomplishes the task?
   

   

   AOption A
   

   BOption B
   

   COption C
   

   DOption D
   

   Correct answer: D

   
   

3. Question 3

   Refer to the exhibit.

   

   Refer to the exhibit. EIGRP peering was lost.

   Which configuration resolves the issue?

   Arouter EIGRP 88metric weights 0 1 1 0 01
   

   Brouter EIGRP 88metric weights 1 0 1 0 10
   

   Crouter EIGRP 88metric weights 0 1 1 100
   

   Drouter EIGRP 88metric weights 111000
   

   Correct answer: C

   
   

4. Question 4

   Exhibit:

   

   Which action resolves the authentication problem?

   AConfigure the user name on the TACACS+ server
   

   BConfigure the UDP port 1812 to be allowed on the TACACS+ server
   

   CConfigure the TCP port 49 to be reachable by the router
   

   DConfigure the same password between the TACACS+ server and router.
   

   Correct answer: D

   Explanation

   From the last line of the output, we notice that the result was ''Invalid AUTHEN packet''. Therefore something went wrong with the username or password.

   
   

5. Question 5

   Refer to the exhibit.

   

   An administrator configures a router to stop using a particular default route if the DNS server 8.8.8.8 is not reachable through that route. However, this configuration did not work as desired and the default route still works even if the DNS server 8.8.8 8 is unreachable. Which two configuration changes resolve the issue? (Choose two.)

   AConfigure two static routes for the 8.8.8.8/32 destination to match the IP SLA probe for each ISP.
   

   BAssociate every IP SLA probe with the proper WAN address of the router.
   

   CReference the proper exit interfaces along with the next hops in both static default routes.
   

   DUse a separate track object to reference the existing IP SLA 1 probe for every static route.
   

   EUse a separate IP SLA probe and track object for every static route
   

   Correct answer: A, E