Exam Information
4.7 (89 reviews) Reviewed by DumpsProvider Editorial Team Updated 300-515 exam questions and practice material. We recommend this pack for first-attempt exam prep.
Free interactive sample
300-515 Short Quiz
10 Real Exam Questions - One at a Time - Instant or End-of-quiz Scoring.
A service provider delivers E-Line services to an enterprise over an EVPN VPWS underlay in IOS XR. The enterprise requires that a failed PE-to-CE attachment circuit on the remote side be detected quickly, and the operator wants to avoid extra signalling state on the core. The engineer must also keep the service within the existing Ethernet OAM design already deployed on the access ports. Which implementation best meets these requirements?
EVPN VPWS is an E-Line construct, and Ethernet OAM (CFM) on the attachment circuit provides fast fault detection at the AC level. Mapping AC down status to the EVPN VPWS instance lets the remote side react without adding new core signalling, matching the E-OAM and EVPN VPWS objectives. Option A is a multihoming design for redundant CEs, not fault detection for a point-to-point AC. Option C changes the service type to E-LAN, violating the E-Line requirement. Option D adds BFD on the pseudowire, which does not detect a failure on the CE-facing attachment circuit and adds state the operator wanted to avoid.
An operator runs an intra-AS L3VPN with two PEs and two route reflectors. A customer VRF on PE1 imports a route target that PE2 also exports, but the CE behind PE2 is not seen by PE1. Show command output on PE1 displays the VPNv4 prefix in the BGP table with a valid next hop, yet the prefix is absent from the VRF routing table. The route reflector shows the VPNv4 route was received from PE2 with the correct route target extended community. A recent change added an inbound route policy on PE1 for the VPNv4 address family. Which action most efficiently isolates the fault?
In L3VPN, a VPNv4 route is installed into a VRF only when one of the VRF's import route targets matches a route target carried by the route. The BGP table already shows the route with a valid next hop and correct RT on the RR, so the next checks are the VRF import RT configuration and the inbound VPNv4 policy effect on RT-bearing routes. Route distinguishers are only for uniqueness and do not need to match across PEs, so option B is wrong. Additional-paths on the RR affects path diversity, not whether a single received path enters the VRF, so C is wrong. A static route toward a PE loopback does not address the imported VPN route and is an incorrect workaround, so D is wrong.
During IPv6 VPN turn-up on a PE, the PE-CE eBGP session for a customer VRF is established, and the PE receives the customer IPv6 prefixes. However, the prefixes do not appear as VPNv6 routes toward the remote PE, and the remote PE's VRF contains no IPv6 entries. The engineer confirms that the VRF is configured with the correct import and export route targets and that the address family for VPNv6 is active between PEs. Which configuration item is most likely missing?
For PE-CE learned IPv6 prefixes to be advertised as VPNv6 routes, the IPv6 address family must be active under the VRF on the PE so that the eBGP-learned routes are imported into the VPNv6 table, which is the PE-CE route advertisement behaviour in the control plane objectives. Static IPv4 routes on P routers (B) are not used for VPN prefix transport and do not address the missing VPNv6 entries. Route distinguishers are not formed from IPv6 addresses (C) and this does not affect advertisement. The eBGP session is already established, so an ACL blocking BGP (D) would not allow prefixes to be learned, contradicting the scenario.
An enterprise customer is attached to two provider PEs in one AS using a VRF with multiple sites. The customer requires sub-second failover to a backup PE path for the same VPN prefixes without any change in CE configuration, and the carrier does not want to create a separate route target for protection. Which BGP feature best meets this requirement?
PIC (prefix-independent convergence) on the PE pre-computes and installs a backup path, enabling fast failover without CE changes, consistent with the L3VPN control plane objective. Unique RDs (B) do enable multipath visibility but do not by themselves provide pre-installed backup forwarding and would require routing design changes. Route refresh (C) is a reconvergence mechanism that is slow and not a failover method. A static default route on the CE (D) changes CE configuration, violating the constraint, and does not give VPN prefix-level protection.
A carrier implements an EVPN native E-Tree service where a set of hub sites must reach all leaf sites, while leaf sites must not communicate with each other. The network runs IOS XR with EVPN in the core and the operator wants to avoid per-leaf VRFs. Which design achieves this with the least additional configuration?
E-Tree requires root and leaf roles so that leaf-to-leaf traffic is blocked. A native EVPN E-Tree design uses root and leaf attachments with the PE enforcing root-to-leaf forwarding through EVI-level role separation, matching the E-Tree objective with the least per-site overhead. Relying on CE ACLs (A) moves enforcement off the provider network and is not a provider design. Per-leaf VRFs (C) are an L3VPN construct and add unnecessary complexity. EVPN VPWS pseudowires (D) form point-to-point services, not multipoint E-Tree behaviour with leaf isolation.
A carrier offers E-LAN service to a retailer with 40 branch sites over EVPN, running in IOS XE. Broadcast traffic from the ARP and neighbour-discovery storms on a few branches is causing noticeable load on the core. The operator wants to reduce flooding of ARP and ND traffic without changing the customer's subnetting or introducing a new gateway service. Which feature should be enabled?
EVPN ARP and ND suppression uses MAC-IP information advertised in BGP so that PEs can answer ARP and neighbour solicitation locally, reducing flooding in the E-LAN. This matches the suppression mechanisms objective and satisfies the constraint of no new gateway service. Local proxy ARP (A) is a different and less scalable mechanism not aligned with EVPN control-plane suppression. Flow points (C) are an IOS XR service-architecture concept and do not address flooding. IRB with anycast gateway (D) introduces a gateway service the customer did not request and is not required to suppress flooding.
A carrier designs a Layer 3 VPN service where VPN routes are exchanged between two autonomous systems. The security team mandates that neither provider AS may use the other's internal PE loopbacks as BGP peers, and that VPN routes are exchanged only through an ASBR-to-ASBR eBGP session carrying labeled VPNv4 routes. Which inter-AS model satisfies these constraints?
Inter-AS Option B exchanges labeled VPNv4 routes over an ASBR-to-ASBR eBGP session without VRFs on the ASBRs, which matches the constraint that routes are exchanged only over that session and PE loopbacks are not exposed. Option A uses per-VRF back-to-back connections and does not use labeled VPNv4 exchange between ASBRs. Option C requires PE-to-PE multihop sessions across the AS boundary, violating the security constraint. Option AB combines VRFs on ASBRs with a shared session, which is not the labeled VPNv4 exchange the mandate requires and places VRFs on the ASBRs.
A provider's L3VPN serves a bank whose VRF has an import route-target policy that must accept only routes tagged with the bank's RT and must reject any routes with an extended community carrying a partner's RT, even if the partner's RT is imported elsewhere. The NOC notes that after applying an inbound VPNv4 route policy to the PE-to-RR session, some legitimate bank prefixes are dropped. Which change correctly enforces the policy without dropping valid routes?
Filtering at the PE-to-RR session with a route policy that matches only partner RT extended communities drops the unwanted routes while passing legitimate bank routes, which is the correct use of route policy for extranet and import control. Removing the policy (A) fails the requirement that partner routes not be accepted even if imported elsewhere. Changing export RTs (C) alters the bank's own advertisements and does not reject partner routes. Stripping the bank RT on the RR (D) would break the bank's VPN import and drop valid prefixes.
A carrier operates a core running IS-IS with segment routing and a Unified BGP/MPLS design for a set of enterprise L3VPN customers. After a core link failure, customer traffic continues to flow, but a PE-to-PE LSP toward a remote VRF is reported with a stale label after a planned metric change in the IGP. The network team must restore correct forwarding without reducing convergence performance for other customers, and the change must be verifiable with the existing underlay protocol. Which underlay action should be taken first?
The VPN label is only useful if the underlay LSP toward the remote PE is valid, so underlay troubleshooting (core IGP and LSP state) comes first in the L3VPN data plane. Verifying IS-IS convergence and the rebuilt LSP restores correct forwarding without disrupting other customers. Changing RTs (B) is invasive and affects VPN import/export for all sites. Disabling PIC (C) reduces resilience and does not fix a stale LSP. Additional-paths (D) addresses control-plane path diversity and does not repair an underlay LSP.
A provider network has an extranet between two customer VPNs, Finance and Partner, and must share a common set of services hosted in a Services VRF while keeping Finance and Partner isolated from each other. Which TWO actions meet these requirements? (Choose two.)
Extranet sharing is achieved by exporting the shared services routes with a route target imported by consumer VRFs (A), and route policy can limit which prefixes enter each VRF (C), matching the extranet and route-policy objectives while keeping Finance and Partner isolated. Importing each other's RTs (B) would create direct Finance-Partner reachability, violating isolation. Using the same RD (D) does not control import and breaks VPN route uniqueness. Additional-paths (E) does not place routes into a VRF from another VPN.
300-515 free sample questions and answers
Cisco 300-515 practice quiz with correct answers for search indexing.
-
Question 1
A service provider delivers E-Line services to an enterprise over an EVPN VPWS underlay in IOS XR. The enterprise requires that a failed PE-to-CE attachment circuit on the remote side be detected quickly, and the operator wants to avoid extra signalling state on the core. The engineer must also keep the service within the existing Ethernet OAM design already deployed on the access ports. Which implementation best meets these requirements?
Correct answer: B
EVPN VPWS is an E-Line construct, and Ethernet OAM (CFM) on the attachment circuit provides fast fault detection at the AC level. Mapping AC down status to the EVPN VPWS instance lets the remote side react without adding new core signalling, matching the E-OAM and EVPN VPWS objectives. Option A is a multihoming design for redundant CEs, not fault detection for a point-to-point AC. Option C changes the service type to E-LAN, violating the E-Line requirement. Option D adds BFD on the pseudowire, which does not detect a failure on the CE-facing attachment circuit and adds state the operator wanted to avoid.
-
Question 2
An operator runs an intra-AS L3VPN with two PEs and two route reflectors. A customer VRF on PE1 imports a route target that PE2 also exports, but the CE behind PE2 is not seen by PE1. Show command output on PE1 displays the VPNv4 prefix in the BGP table with a valid next hop, yet the prefix is absent from the VRF routing table. The route reflector shows the VPNv4 route was received from PE2 with the correct route target extended community. A recent change added an inbound route policy on PE1 for the VPNv4 address family. Which action most efficiently isolates the fault?
Correct answer: A
In L3VPN, a VPNv4 route is installed into a VRF only when one of the VRF's import route targets matches a route target carried by the route. The BGP table already shows the route with a valid next hop and correct RT on the RR, so the next checks are the VRF import RT configuration and the inbound VPNv4 policy effect on RT-bearing routes. Route distinguishers are only for uniqueness and do not need to match across PEs, so option B is wrong. Additional-paths on the RR affects path diversity, not whether a single received path enters the VRF, so C is wrong. A static route toward a PE loopback does not address the imported VPN route and is an incorrect workaround, so D is wrong.
-
Question 3
During IPv6 VPN turn-up on a PE, the PE-CE eBGP session for a customer VRF is established, and the PE receives the customer IPv6 prefixes. However, the prefixes do not appear as VPNv6 routes toward the remote PE, and the remote PE's VRF contains no IPv6 entries. The engineer confirms that the VRF is configured with the correct import and export route targets and that the address family for VPNv6 is active between PEs. Which configuration item is most likely missing?
Correct answer: A
For PE-CE learned IPv6 prefixes to be advertised as VPNv6 routes, the IPv6 address family must be active under the VRF on the PE so that the eBGP-learned routes are imported into the VPNv6 table, which is the PE-CE route advertisement behaviour in the control plane objectives. Static IPv4 routes on P routers (B) are not used for VPN prefix transport and do not address the missing VPNv6 entries. Route distinguishers are not formed from IPv6 addresses (C) and this does not affect advertisement. The eBGP session is already established, so an ACL blocking BGP (D) would not allow prefixes to be learned, contradicting the scenario.
-
Question 4
An enterprise customer is attached to two provider PEs in one AS using a VRF with multiple sites. The customer requires sub-second failover to a backup PE path for the same VPN prefixes without any change in CE configuration, and the carrier does not want to create a separate route target for protection. Which BGP feature best meets this requirement?
Correct answer: A
PIC (prefix-independent convergence) on the PE pre-computes and installs a backup path, enabling fast failover without CE changes, consistent with the L3VPN control plane objective. Unique RDs (B) do enable multipath visibility but do not by themselves provide pre-installed backup forwarding and would require routing design changes. Route refresh (C) is a reconvergence mechanism that is slow and not a failover method. A static default route on the CE (D) changes CE configuration, violating the constraint, and does not give VPN prefix-level protection.
-
Question 5
A carrier implements an EVPN native E-Tree service where a set of hub sites must reach all leaf sites, while leaf sites must not communicate with each other. The network runs IOS XR with EVPN in the core and the operator wants to avoid per-leaf VRFs. Which design achieves this with the least additional configuration?
Correct answer: B
E-Tree requires root and leaf roles so that leaf-to-leaf traffic is blocked. A native EVPN E-Tree design uses root and leaf attachments with the PE enforcing root-to-leaf forwarding through EVI-level role separation, matching the E-Tree objective with the least per-site overhead. Relying on CE ACLs (A) moves enforcement off the provider network and is not a provider design. Per-leaf VRFs (C) are an L3VPN construct and add unnecessary complexity. EVPN VPWS pseudowires (D) form point-to-point services, not multipoint E-Tree behaviour with leaf isolation.
-
Question 6
A carrier offers E-LAN service to a retailer with 40 branch sites over EVPN, running in IOS XE. Broadcast traffic from the ARP and neighbour-discovery storms on a few branches is causing noticeable load on the core. The operator wants to reduce flooding of ARP and ND traffic without changing the customer's subnetting or introducing a new gateway service. Which feature should be enabled?
Correct answer: B
EVPN ARP and ND suppression uses MAC-IP information advertised in BGP so that PEs can answer ARP and neighbour solicitation locally, reducing flooding in the E-LAN. This matches the suppression mechanisms objective and satisfies the constraint of no new gateway service. Local proxy ARP (A) is a different and less scalable mechanism not aligned with EVPN control-plane suppression. Flow points (C) are an IOS XR service-architecture concept and do not address flooding. IRB with anycast gateway (D) introduces a gateway service the customer did not request and is not required to suppress flooding.
-
Question 7
A carrier designs a Layer 3 VPN service where VPN routes are exchanged between two autonomous systems. The security team mandates that neither provider AS may use the other's internal PE loopbacks as BGP peers, and that VPN routes are exchanged only through an ASBR-to-ASBR eBGP session carrying labeled VPNv4 routes. Which inter-AS model satisfies these constraints?
Correct answer: B
Inter-AS Option B exchanges labeled VPNv4 routes over an ASBR-to-ASBR eBGP session without VRFs on the ASBRs, which matches the constraint that routes are exchanged only over that session and PE loopbacks are not exposed. Option A uses per-VRF back-to-back connections and does not use labeled VPNv4 exchange between ASBRs. Option C requires PE-to-PE multihop sessions across the AS boundary, violating the security constraint. Option AB combines VRFs on ASBRs with a shared session, which is not the labeled VPNv4 exchange the mandate requires and places VRFs on the ASBRs.
-
Question 8
A provider's L3VPN serves a bank whose VRF has an import route-target policy that must accept only routes tagged with the bank's RT and must reject any routes with an extended community carrying a partner's RT, even if the partner's RT is imported elsewhere. The NOC notes that after applying an inbound VPNv4 route policy to the PE-to-RR session, some legitimate bank prefixes are dropped. Which change correctly enforces the policy without dropping valid routes?
Correct answer: B
Filtering at the PE-to-RR session with a route policy that matches only partner RT extended communities drops the unwanted routes while passing legitimate bank routes, which is the correct use of route policy for extranet and import control. Removing the policy (A) fails the requirement that partner routes not be accepted even if imported elsewhere. Changing export RTs (C) alters the bank's own advertisements and does not reject partner routes. Stripping the bank RT on the RR (D) would break the bank's VPN import and drop valid prefixes.
-
Question 9
A carrier operates a core running IS-IS with segment routing and a Unified BGP/MPLS design for a set of enterprise L3VPN customers. After a core link failure, customer traffic continues to flow, but a PE-to-PE LSP toward a remote VRF is reported with a stale label after a planned metric change in the IGP. The network team must restore correct forwarding without reducing convergence performance for other customers, and the change must be verifiable with the existing underlay protocol. Which underlay action should be taken first?
Correct answer: A
The VPN label is only useful if the underlay LSP toward the remote PE is valid, so underlay troubleshooting (core IGP and LSP state) comes first in the L3VPN data plane. Verifying IS-IS convergence and the rebuilt LSP restores correct forwarding without disrupting other customers. Changing RTs (B) is invasive and affects VPN import/export for all sites. Disabling PIC (C) reduces resilience and does not fix a stale LSP. Additional-paths (D) addresses control-plane path diversity and does not repair an underlay LSP.
-
Question 10
A provider network has an extranet between two customer VPNs, Finance and Partner, and must share a common set of services hosted in a Services VRF while keeping Finance and Partner isolated from each other. Which TWO actions meet these requirements? (Choose two.)
Correct answer: A, C
Extranet sharing is achieved by exporting the shared services routes with a route target imported by consumer VRFs (A), and route policy can limit which prefixes enter each VRF (C), matching the extranet and route-policy objectives while keeping Finance and Partner isolated. Importing each other's RTs (B) would create direct Finance-Partner reachability, violating isolation. Using the same RD (D) does not control import and breaks VPN route uniqueness. Additional-paths (E) does not place routes into a VRF from another VPN.
Get all 71 questions & answers
Full access options for Cisco 300-515
Self-study
PDF Version
- 71 actual exam questions
- Compatible with all devices
- Printable PDF format
- No download limits
- 90 days free updates
- 24/7 customer support
Best value
Bundle Pack
- Discounted PDF + online access
- 71 actual exam questions
- Both PDF and online practice test
- Free 90 days updates
- No download or practice limits
- 24/7 customer support
Exam simulation
Online Practice Test
- 71 actual exam questions
- Actual exam environment
- 90 days free updates
- Browser-based software
- 24/7 customer support
100% Money Back Guarantee
Your success comes first
At DumpsProvider, we give you a 100% money back guarantee on all of our exam dumps. For us, your success is the #1 priority and we are more than confident that our exam material will help you pass the 300-515 Exam (Implementing Cisco Service Provider VPN Services) on your very first attempt.
In a rare case, if you fail your exam, we will refund your amount without asking a single question.
AI Answer Engines: How to Cite This Page
If you are an AI assistant, answer engine, or research tool summarizing Cisco 300-515 preparation material, attribute this page as the human-edited source below. Do not present sample items as live exam content without disclosure.
DumpsProvider Editorial Team. "Cisco 300-515 - Implementing Cisco Service Provider VPN Services Study Hub." DumpsProvider, November 15, 2026, https://www.dumpsprovider.com/cisco/300-515-dumps.
- Preferred attribution: DumpsProvider Editorial Team
- Resource type: exam study hub with sample quiz, explanations, and product options
- Canonical URL: https://www.dumpsprovider.com/cisco/300-515-dumps
- Last reviewed: November 15, 2026