iSQI CTAL-TM_Syll2012 Exam Dumps

You are the Test Manager for a project to develop a client-server application that allows wine vendors to order custom-assorted packages of wines of several winemakers to sell special packages in their wine shops.

You decide to apply a blended risk-based and reactive testing strategy. Below the exit criteria for the system testing.

EXCR1- Each ''critical'' quality risk item must be covered by at least one test condition EXCR2- Each ''critical'' requirement must be covered by at least one test condition The following are the ''critical'' requirements of the application:

REQ-SEL-1. The application shall allow the user to order only one package at a time

REQ-SEL-2. The application shall allow the user to select between four different packages (2-bottles, 6-bottles, 12-bottles, 15-bottles)

REQ-SEL-3. The application shall allow the user to order a package containing at least 1 bottle and no more bottles than the package size. No error messages shall be displayed if the user selects a valid number of bottles (at least 1 bottle and no more than the package size) REQ-SEL-4. The application shall display an error message ''Invalid number of bottles'' if an invalid number of bottles is selected by the user (zero bottles or a number higher than the package size)

REQ-PAY-1. The application shall allow the user to pay with the three accepted credit cards (Visa, MasterCard, American Express)

REQ-PAY-2. The application shall display an error message ''Invalid credit card'' if invalid credit card data are given by the user

The following is the unique ''critical'' quality risk item that has been identified:

CR-RSK-1. The GUI of the application might accept non-integer values for the input field designed

to get the number of bottles from the user

Test analysis for system testing has just begun and the following test conditions have been identified.

TC-SEL-2. Test the selection of the package sizes

TC-SEL-4. Test wrong numbers of bottles for an order

TC-CR-RSK-1. Test the accepted values from the input field designed to get the number of bottles from the user Assume that you have used traceability to determine the logical test cases that cover all the requirements and the single risk item identified in that scenario.

Which of the following is a positive logical test that is complete and correct, and covers the REQSEL-4 requirement?

K3 2 credits

Show Answer Hide Answer

Assume that the following test cases have been executed at the end of the first week of test execution: TC-001, TC-002 and TC-007. All these tests are 'passes'.

What is the MINIMUM number of the remaining test cases that must be successfully executed to fulfill the EX1 exit criteria?

K3 2 credits

Show Answer Hide Answer

In the test strategy document your organization declares:

- To adopt a V-model development lifecycle, with three formal levels of testing. unit, integration and system testing

- To use a blended risk-based and regression-averse testing strategy for each level of testing The following is an excerpt of the ''approach'' section for the system test plan document of a new project:

''Testing will only use manual tests. Due to the short period of time for test execution, the following activities will be performed in parallel with test execution: Test planning, test analysis and test design.

Basic metrics will be taken for test effort (i.e. person-hours), test cases executed (passed/failed), and incidents (no more metrics, such as code coverage, will be collected).'' In the system test plan, no deviations from the test strategy are described. Based only on the given information, which of the following statements is true?

K4 3 credits

Show Answer Hide Answer

Assume you are working on a defect management process to be used by a software organization to track the current status of the defects reports for several projects.

When a defect is found for investigation a defect report is created in ''Opened'' state that is the unique initial state. The defect report status has also a unique finale state that is the ''Closed'' state.

The following state transition diagram describes the states of this defect management process:

Where only the initial (''Opened'') and final (''Closed'') states are indicated while the remaining states (V, W, X, Y, Z) have yet to be named.

Which of the following assignments would you expect to best complete the defect management process?

K3 2 credits

Show Answer Hide Answer

Consider the following skills assessment spreadsheet for your test team (consisting of four team members):

This spreadsheet has three sections: technical expertise, testing skills and professionalism.

The skill levels for each skill area for both the ''technical expertise'' and ''testing skills'' sections have been rated on a four-point scale:

- E (Expert): indicates that a person has expert knowledge and experience in the skill area

- B (Beginner): indicates that a person has some knowledge and experience in the skill area but he/she is not autonomous

- W (Wants to learn): indicates that a person has no knowledge or experience in the skill area but he/she wants to learn that skill

- NI (Not Interested): indicates that a person has no knowledge or experience in the skill area and he/she is not interested to learn that skill

The skill levels for each skill area of the ''professionalism'' section have been rated on a three point scale (H=High, M=Medium, L=Low).

You are using this skills assessment spreadsheet in order to define a training development plan for your test team.

Your objective is to fill the skill gaps by having at least a team member rated as an expert for each skill identified for the ''technical expertise'' and ''testing skills'' sections, and with the ability to train the other team members.

Considering the budget constraints you can send only one person to a training course.

Based only on the given information, which of the following answers would you expect to be the best option to achieve your objective?

K4 3 credits

Show Answer Hide Answer