2026 Actual HP HPE6-A85 Dumps, Updated Exam Questions for Guaranteed Pass

HPE6-A85 free sample questions and answers

HP HPE6-A85 practice quiz with correct answers for search indexing.

1. Question 1

   Which type of device type and group persona is required to manage a Microbranch environment?

   AArubaOS 10 AP Group Persona
   

   BArubaOS 10 Branch Gateway Group Persona
   

   CArubaOS 8 AP Group Persona
   

   DArubaOS 8 Branch Gateway Group Persona
   

   Correct answer: B

   In the context of Aruba networks, a Microbranch environment is managed using a group persona that aligns with the functionality required. ArubaOS 10 Branch Gateway Group Persona would be the correct device type and group persona for managing a Microbranch environment, as it would provide the necessary features and controls for branch networking requirements.

   
   

2. Question 2

   What happens when the signal from an AP weakens by being absorbed as it moves through an object?

   AAPs will use bonded channels to decrease latency to clients
   

   BSignal to Noise Ratio (SNR) increases
   

   CSignal to Noise Ratio (SNR) decreases
   

   DAruba Central dynamically moves clients to neighboring APs
   

   Correct answer: C

   Signal to noise ratio (SNR) is a measure that compares the level of a desired signal to the level of background noise. SNR is defined as the ratio of signal power to the noise power, often expressed in decibels (dB).A high SNR means that the signal is clear and easy to detect or interpret, while a low SNR means that the signal is corrupted or obscured by noise and may be difficult to distinguish or recover1. When the signal from an AP Access Point. AP is a device that allows wireless devices to connect to a wired network using Wi-Fi, or related standards. weakens by being absorbed as it moves through an object, such as a wall or a furniture, the signal power decreases. This reduces the SNR and affects the quality of the wireless connection.The noise power may also increase due to interference from other sources, such as other APs or devices operating in the same frequency band2.Therefore, the correct answer is that SNR decreases when the signal from an AP weakens by being absorbed as it moves through an object. Reference:1https://en.wikipedia.org/wiki/Signal-to-noise_ratio2https://documentation.meraki.com/MR/Wi-Fi_Basics_and_Best_Practices/Signal-to-Noise_Ratio_%28SNR%29_and_Wireless_Signal_Strength

   
   

3. Question 3

   A network technician is verifying that a customer successfully connected to the guest network after completing the captive portal. The network technician looks at the access tracker in ClearPass.

   Which role should be seen when looking at the OUTPUT tab for the customer's session?

   AGuest authenticated
   

   BCaptive portal login
   

   CCaptive portal redirect
   

   DGuest logon
   

   Correct answer: A

   In the access tracker of ClearPass, after a customer successfully connects to a guest network through a captive portal, the OUTPUT tab should show a role indicating that the user is authenticated, such as 'Guest authenticated.' This role confirms that the user has passed the authentication process and has been granted access.

   
   

4. Question 4

   What describes Clearpass OnGuard? (Select two.)

   AOnguard assings an unique identity to each device.
   

   BIt is used for the self-registration of guest devices.
   

   COnGuard is an agent, running on client systems.
   

   DOnGuard is doing posture checks on client systems.
   

   EIt is an intuitive portal for users to securely configure their devices.
   

   Correct answer: C, D

   ClearPass OnGuard is a component of the ClearPass Policy Manager that performs health and security posture checks on devices to ensure they meet the organization's compliance requirements before allowing access to the network. It operates as an agent on client systems to perform these checks.

   
   

5. Question 5

   An AP signal strength of .0000001 milliwatts equals how many dBm?

   A-90 dBm
   

   B-60 dBm
   

   C-70 dBm
   

   D-80 dBm
   

   Correct answer: C

   An AP signal strength of .0000001 milliwatts is equivalent to -80 dBm. The dBm scale is logarithmic, with every 10 dBm representing a tenfold increase or decrease in power. A signal strength of 1 milliwatt (mW) is 0 dBm, so a signal strength of .0000001 mW is 80 decibels less than 1 mW, which is -80 dBm.