2026 Actual Cisco 350-801 Dumps, Updated Exam Questions for Guaranteed Pass

350-801 free sample questions and answers

Cisco 350-801 practice quiz with correct answers for search indexing.

1. Question 1

   Refer to the exhibit.

   

   Refer to the exhibit Engineers dial the 66895531 route pattern from 66623536 to reach out to the IT department in a different building with different Cisco UCM clusters When doing this the engineers receive a busy tone The issue is reported to the administrator who used ON 56436223 to validate the issue and received the same busy tone The administrator used the Real Time Monitoring Tool to verify the termination code of the call and found SIP_503_SERVICE_UNAVAI LABIE What is the reason for this failure?

   ARoute pattern 56895531 has a route group that contains out of service devices
   

   BRoute pattern 56895531 has 'Block this pattern' enabled
   

   C56436223 cannot complete the call due to incorrect class of control configuration
   

   DRoute pattern for 56896531 has no route partition configured
   

   Correct answer: A

   The SIP_503_SERVICE_UNAVAILABLE error code indicates that the SIP server or endpoint being contacted cannot process the request at that moment. In this case:

   • The route pattern 66895531 is configured to reach the IT department in the remote building/cluster
   • The SIP 503 response means the destination gateway, Cisco UCM cluster, or SIP endpoint is unavailable or not responding
   • Both the engineer's call and the administrator's test call received the same error, confirming the issue is on the destination side, not the originating side

   To resolve this, verify that the remote UCM cluster is running, the SIP trunk is up, and the destination gateway is reachable and operational.

2. Question 2

   An administrator must enable a feature that automatically records all Webex Meetings for a specific team and stores them in the cloud. Which setting must the administrator configure in Webex Control Hub to meet the requirement?

   ASet a recurring meeting template with recording enabled.
   

   BEnable Automatic Recording within the Meeting settings for the team.
   

   CConfigure a global cloud storage retention policy.
   

   DAdjust individual user recording permissions.
   

   Correct answer: B

   To automatically record all Webex Meetings for a specific team and store them in the cloud, the administrator must configure the following setting in Webex Control Hub:

   Automatic Recording Settings (Site-Level or User-Level Recording Policy)

   Specifically:

   1. Navigate to Webex Control Hub > Sites > [Site Name] > Common Settings > Automatic Recording, or
   2. User Management > [User/Team] > Meeting Settings > Recording
   3. Enable 'Auto Record All Meetings' or 'Record meetings automatically'
   4. Ensure the recording setting is applied to the specific team (user group or organization)
   5. Verify the Recording Storage is set to 'Cisco Cloud Storage' or default cloud storage option

   Additional configuration may include:

   • Setting Recording Storage Options to ensure recordings are stored in cloud (not local)
   • Configuring Recording Retention Policies to define how long recordings are kept
   • Enabling Compliance Officer Recording if applicable for audit requirements
   • Setting Recording Notification to inform participants that meetings are being recorded

   The primary setting is Automatic Recording within the team or site configuration, set to automatically record all meetings and store in cloud storage.

3. Question 3

   Which location must be assigned to the SIP trunk to replicate enhanced location information via a SIP trunk?

   Aphantom
   

   Breplica
   

   Chub_none
   

   Dshadow
   

   Correct answer: D

   To replicate enhanced location information via a SIP trunk, the Device Location must be assigned to the SIP trunk configuration. The device location contains location data (such as physical address or location identifier) that is then transmitted through the SIP trunk using Enhanced Location Information (ELI) in the SIP headers (typically in the P-Preferred-Identity or Location header). This ensures that location information is properly conveyed across the SIP trunk for emergency services or call routing purposes.

4. Question 4

   An administrator is troubleshooting MRA registration failures and discovered that the affected endpoints have expired manufacturer-installed certificates (MICs) What must be configured to permit the end-to-end registration and media encryption without using the Certificate Authority Proxy Function?

   ASIP OAuth
   

   BSIP TLS
   

   Csingle sign-on
   

   DMIC certification regeneration
   

   Correct answer: D

   When manufacturer-installed certificates (MICs) expire on endpoints, the Certificate Authority Proxy Function (CAPF) must be configured to issue new Locally Significant Certificates (LSCs) to the endpoints. However, the question asks for an end-to-end solution WITHOUT using CAPF. In such cases, administrators must configure Certificate Trust List (CTL) and trust the expired certificates, or deploy LSCs through an alternative method. The most accurate answer is to configure CAPF properly or implement a workaround using CTL files that trust the legacy certificates to maintain registration and encryption without CAPF involvement through alternative certificate provisioning methods.

5. Question 5

   Refer to the exhibit.

   

   An administrator is configuring a new phone on a Cisco UCM cluster and the phone failed to register. The Cisco UCM cluster is in non-secure mode. Which action resolves the issue?

   AUpdate phone configuration in Cisco UCM with the correct MAC address.
   

   BEnsure that DHCP scope has option 150 configured.
   

   CDelete phone ITL file.
   

   DManually configure voice VLAN on the phone.
   

   Correct answer: C