Exam Information
Free interactive sample
L6M8 Short Quiz
10 Real Exam Questions - One at a Time - Instant or End-of-quiz Scoring.
A defence contractor is developing a new avionics module with a tier-two supplier that has strong engineering capability but limited experience of the contractor's quality regime. The contractor wants to transfer a proven process for surface finishing so the supplier can produce the part to the required specification. The programme office asks procurement to confirm the safest route for the transfer. Which route is most appropriate?
A structured technology transfer with joint validation trials gives the supplier the capability to reproduce the process to specification and provides evidence before volume approval, which suits a defence programme with a quality regime to meet. Sending documentation without validation skips the proof that the process works in the supplier's hands. Switching to an inexperienced low-cost supplier increases quality risk. Keeping the process in-house and delaying supplier involvement until service entry defeats the purpose of developing the supplier's capability.
A furniture retailer wants to tender a new range of office chairs. Its sustainability committee asks that the specification cover the whole product lifecycle, including end-of-life recovery, and that the supplier demonstrate a management system for environmental performance. The procurement team has been asked to ensure the approach aligns with a recognised standard for sustainable procurement rather than only environmental management. Which combination best meets these requirements in the tender documentation? (Choose two.)
A lifecycle analysis addresses the committee's request to consider the product from extraction to end-of-life, and ISO 14001 provides the recognised environmental management system evidence the committee asked for. Design for disassembly is a sound design measure, but it is a product feature rather than the lifecycle-wide assessment and management standard the question requires, so it is not chosen here. ISO 9001 concerns quality management, not environmental performance. Financial stability is relevant to supplier risk but has no bearing on the environmental requirements.
A public utility runs a lean supply programme for spare parts. Consumables are held in central stores and replenished on fixed monthly cycles, leading to high stock value and frequent obsolescence write-offs. The head of supply proposes a move towards just-in-time replenishment for high-volume, predictable items, while keeping a buffer for critical assets. Regulators require that outages caused by parts shortages are not increased during the transition. Which replenishment design best meets all these requirements?
Just-in-time works best for predictable, high-volume items where supplier delivery is reliable, and retaining buffer stock for critical assets protects against outages, which satisfies the regulator's constraint. Removing all safety stock exposes critical assets to shortage risk and would likely increase outages. Doubling order quantities worsens the obsolescence and holding-cost problem the programme is meant to fix. Relying on emergency air freight is costly and reactive, and it does not reduce the stock value that prompted the change.
A professional services firm runs a procurement technology review. Its contract management team wants AI-based predictive analysis to flag suppliers likely to miss contracted service levels, using historical performance data. The data sits in three systems and includes personal data about named supplier staff who log service tickets. The data protection officer requires that personal data is minimised before analysis and that only aggregated performance outputs reach category managers. Which approach best meets both the analytical aim and the data protection requirement?
Removing or pseudonymising staff identifiers before analysis follows the data minimisation requirement, and restricting outputs to aggregated supplier-level results meets the instruction that only aggregated performance reaches category managers, while still enabling predictive flagging of at-risk suppliers. Feeding named data into the model breaches minimisation. Waiting for a platform replacement is an unnecessary delay that the scenario does not justify. Direct access to source logs exposes personal data to people who only need aggregated outputs.
A regional hospital group runs a three-way match between purchase orders, goods receipts and supplier invoices across five sites, each on a separate ERP instance. Finance wants to stop paying duplicate invoices and give senior management a single, current view of committed spend. The CIO has ruled out replacing the ERP estates within the next 18 months due to budget. The procurement lead must recommend the most effective first step to improve expenditure control. Which action should be recommended FIRST?
Middleware integration addresses the stated constraint directly: the ERP estates stay in place for 18 months, yet records from all five sites can be matched and consolidated into one dataset, which supports duplicate-invoice detection and real-time committed-spend visibility. Replacing reporting modules with a bespoke warehouse ignores the need for upstream integration and is costly. Monthly spreadsheets reintroduce manual error and delay, so they cannot provide a current view. A full migration to a new suite breaks the budget and timeline constraint and is not a first step.
A consumer goods company is building a collaborative innovation programme with its packaging suppliers. Several suppliers have proposed new recyclable materials, but the company's marketing and operations teams have been reviewing supplier ideas in isolation. Senior leaders want a standing governance mechanism that gathers cross-functional and supplier input, prioritises innovation proposals and tracks their progress. Which mechanism most directly meets this requirement?
An innovation council is a standing body that brings internal functions and supplier input together, prioritises proposals and monitors progress, which matches the governance need described. A one-off technology transfer agreement addresses a single supplier rather than a programme. An e-sourcing event selects on price and compliance, which does little to nurture innovation. A newsletter disseminates information but does not govern or prioritise innovation proposals.
A manufacturer is redesigning a sub-assembly that currently requires three machined components from separate suppliers. Engineering has a tight launch date and wants to avoid rework after tooling is cut. The sourcing team proposes bringing the two shortlisted tier-one suppliers into design reviews now, before the drawings are frozen, and running the product and process design in parallel rather than in sequence. The procurement director must choose the approach that best supports this aim. Which approach should be adopted?
Early supplier involvement combined with simultaneous (concurrent) engineering lets suppliers influence product and process design while changes are still cheap, which is exactly what the tight launch date demands. Sequential handover after the design freeze reproduces the rework problem the director is trying to avoid. A quarterly forum reviewing historic data looks backward and does not shape the new design. A technology transfer licence is premature, since no capability has yet been established and the design is not specified.
A national retailer is preparing a sustainable procurement policy for its own-brand cleaning products. The sustainability director wants the policy to influence strategic planning and not only supplier scoring, and to set measurable targets for low waste and water efficiency aligned with international commitments. The policy must reference a recognised sustainable procurement standard rather than an environmental management system standard alone. Which step should the procurement team take NEXT when drafting the policy?
ISO 20400 is the sustainable procurement standard, and embedding its guidance in the category strategy and annual planning gives the policy the strategic reach the director requires, including measurable low-waste and water targets. ISO 14001 is an environmental management system standard, which the question explicitly says is insufficient on its own. Requiring waste data on invoices is a reporting detail, not a strategic policy step. Design for disassembly is a product measure that does not address water or waste targets across the policy. A labour and anti-bribery code addresses different sustainability dimensions and omits the environmental targets requested.
A logistics provider is planning business continuity for its inbound supply of a critical refrigerant component, which comes from a single overseas supplier with a six-week lead time. A recent port strike caused a four-week delay. The continuity plan must reduce the risk of production interruption within the next quarter without requiring the company to double its working capital. Which action should be taken FIRST?
Qualifying a second source directly reduces single-supplier risk and can be validated quickly with a pilot order within the quarter, without the heavy working capital that the constraint rules out. A twelve-month forward order ties up capital and still leaves the single-source exposure in place. Holding six months of safety stock breaches the working capital constraint. Insourcing production cannot be achieved within a quarter and requires major investment.
A municipal authority is reviewing its e-procurement arrangements for low-value goods. Departments currently raise requests by email and buy from many suppliers at inconsistent prices. The authority wants to channel purchases through pre-approved product lists, with contract prices loaded so requisitioners see the agreed price, without giving each department the ability to change supplier master data. Which e-procurement arrangement best meets these requirements?
Electronic catalogues with contract prices give requisitioners pre-approved items at agreed prices, and keeping supplier master data under central control satisfies the requirement that departments cannot alter it. A free-text form allows any supplier and price, which defeats the purpose. Running a sourcing event for each low-value purchase is disproportionately costly and slow for this category. A departmental spreadsheet of prices is not an e-procurement control and cannot enforce contract pricing.
Get all 120 questions & answers
Full access options for CIPS L6M8
Self-study
PDF Version
- 120 actual exam questions
- Compatible with all devices
- Printable PDF format
- No download limits
- 90 days free updates
- 24/7 customer support
Best value
Bundle Pack
- Discounted PDF + online access
- 120 actual exam questions
- Both PDF and online practice test
- Free 90 days updates
- No download or practice limits
- 24/7 customer support
Exam simulation
Online Practice Test
- 120 actual exam questions
- Actual exam environment
- 90 days free updates
- Browser-based software
- 24/7 customer support
100% Money Back Guarantee
Your success comes first
At DumpsProvider, we give you a 100% money back guarantee on all of our exam dumps. For us, your success is the #1 priority and we are more than confident that our exam material will help you pass the L6M8 Exam (Innovation in Procurement and Supply) on your very first attempt.
In a rare case, if you fail your exam, we will refund your amount without asking a single question.