2026 Actual Amazon PAS-C01 Dumps, Updated Exam Questions for Guaranteed Pass

PAS-C01 free sample questions and answers

Amazon PAS-C01 practice quiz with correct answers for search indexing.

1. Question 1

   A company is hosting its SAP workloads on AWS An SAP solutions architect is designing high availability architecture for the company's production SAP S4HANA and SAP BW-4HANA workloads These workloads have the following requirements.

   * Redundant SAP application servers that consist of a primary application server (PAS) and an additional application server (AAS)

   * ASCS and ERS instances that use a failover cluster

   * Database high availability with a primary DB Instance and a secondary OB instance

   How should the SAP solutions architect design the architecture to meet these requirements?

   ADeploy ASCS and ERS cluster nodes in different subnets within the same Availability Zone Deploy the PAS instance and AAS instance in different subnets within the same Availability Zone Deploy the primary DB instance and secondary DB instance m different subnets within the same Availability Zone Deploy all the components in the same VPC
   

   BDeploy ASCS and ERS duster nodes m different subnets within the same Availability Zone Deploy the PAS instance and AAS instance in different subnets within the same Availably Zone Deploy the primary DB instance and secondary DB instance m different subnets within the same Availability Zone Deploy the ASCS instance PAS instance and primary DB instance in one VPC Deploy the ERS instance AAS instance and secondary DB instance in a different VPC
   

   CDeploy ASCS and ERS cluster nodes in different subnets across two Availability Zones Deploy the PAS instance and AAS instance m different subnets across two Availability Zones Deploy the primary DB instance and secondary DB instance in different subnets across two Availability Zones Deploy all the components in the same VPC
   

   DDeploy ASCS and ERS cluster nodes in different subnets across two Availability Zones Deploy the PAS instance and AAS instance m different subnets across two Availability Zones Deploy the primary DB instance and secondary DB instance in different subnets across two Availability Zones Deploy the ASCS instance PAS instance and primary DB instance in one VPC Deploy the ERS instance AAS instance and secondary DB instance in a different VPC
   

   Correct answer: C

   This solution would ensure that the ASCS and ERS instances are deployed in different subnets across different Availability Zones, providing redundancy for the failover cluster. The PAS and AAS instances are also deployed in different subnets across different Availability Zones, providing redundancy for the application servers. The primary and secondary DB instances are also deployed in different subnets across different Availability Zones, providing redundancy for the database. Additionally, all the components are deployed in the same VPC, which will minimize the cost of communication between the application server and the database server.

   C is correct because deploying ASCS and ERS cluster nodes, PAS and AAS instances, and primary and secondary DB instances in different subnets across two Availability Zones provides high availability and fault tolerance for the SAP workloads. Deploying all the components in the same VPC allows for low-latency communication between them. Reference: https://docs.aws.amazon.com/whitepapers/latest/sap-on-aws-technical-deployment-guide/high-availability.html https://docs.aws.amazon.com/whitepapers/latest/sap-on-aws-technical-deployment-guide/vpc-design.html

   
   

2. Question 2

   An SAP solutions architect is leading the SAP basis team for a company. The company's SAP landscape includes SAP HANA database instances for the following systems sandbox development quality assurance test {QAT} system performance test (SPT) and production. The sandbox development and OAT systems are running on Amazon EC2 On-Demand Instances. The SPT and production systems are running on EC2 Reserved Instances All the EC2 instances are using Provisioned IOPS SSO (K)2) Amazon Elastic Block Store (Amazon EBS) volumes.

   The entire development learn is in the same time zone and works from 8 AM to 6 PM. The sandbox system is for research and testing that are not critical. The SPT and production systems are business critical The company runs load-testing jobs and stress-testing jobs on the QAT systems overnight to reduce testing duration. The company wants to optimize infrastructure cost for the existing AWS resources.

   How can the SAP solutions architect meet these requirements with the LEAST amount of administrative effort?

   AUse a Spot Fleet instead of the Reserved Instances and On-Demand Instances
   

   BUse Amazon EventBridge (Amazon CloudWatch Events) and Amazon CloudWatch alarms to stop the development and sandbox EC2 instances from 7 PM every night to 7 AM the next day
   

   CMake the SAP basis team available 24 hours a day 7 days a week to use the AWS CLi to stop and start the development and sandbox EC2 instances manually
   

   DChange the EBS volume type to Throughput Optimized HDD (sti) for the /hana/data and nana, log file systems for the production and non-production SAP HANA databases
   

   Correct answer: B

   B is correct because using Amazon EventBridge (Amazon CloudWatch Events) and Amazon CloudWatch alarms to stop the development and sandbox EC2 instances from 7 PM every night to 7 AM the next day reduces the infrastructure cost for the non-critical systems that are not used during that time. This solution also requires the least amount of administrative effort as it is automated and does not require manual intervention. Reference: https://docs.aws.amazon.com/whitepapers/latest/sap-on-aws-technical-deployment-guide/cost-optimization.html https://docs.aws.amazon.com/whitepapers/latest/sap-on-aws-technical-deployment-guide/amazon-ec2.html

   
   

3. Question 3

   A company has deployed a highly available SAP NetWeaver system on SAP HANA into a VPC The system is distributed across multiple Availability Zones within a single AWS Region SAP NetWeaver is running on SUSE Linux Enterprise Server for SAP SUSE Linux Enterprise High Availability Extension is configured to protect SAP ASCS and ERS instances and uses the overlay IP address concept The SAP shared dies sapmnt and . usrsap. trans are hosted on an Amazon Elastic File System (Amazon EFS) tile system

   The company needs a solution that uses already-existing private connectivity to the VPC. The SAP NetWeaver system must be accessible through the SAP GUI client tool.

   Which solutions will meet these requirements? (Select TWO)

   ADeploy an Application Load Balancer Configure the overlay IP address as a target
   

   BDeploy a Network Load Balancer Configure the overlay IP address as a target
   

   CUse an Amazon Route 53 private zone Create an A record that has the overlay IP address as a target
   

   DUse AWS Transit Gateway Configure the overlay IP address as a static route in the transit gateway route table Specify the VPC as a target
   

   EUse a NAT gateway Configure the overlay IP address as a target
   

   Correct answer: B, C

   Option B is correct because it uses a Network Load Balancer to enable network access to the overlay IP address for the SAP NetWeaver system. A Network Load Balancer supports TCP protocol and can route traffic to targets using IP addresses. It also provides high availability and scalability for the network connection.

   Option C is correct because it uses Amazon Route 53 private zone to create an A record that has the overlay IP address as a target. This allows the SAP GUI client tool to resolve the overlay IP address to the SAP NetWeaver system. It also uses the existing private connectivity to the VPC without requiring any additional components or configuration.

   Option A is incorrect because it uses an Application Load Balancer, which does not support TCP protocol for the SAP NetWeaver system. It also uses an overlay IP address as a target, which is not necessary for the network access to the SAP NetWeaver system.

   Option D is incorrect because it uses AWS Transit Gateway, which is not a network configuration for data transfer. It also uses an overlay IP address as a static route in the transit gateway route table, which may cause routing conflicts or errors with the existing private connectivity to the VPC.

   Option E is incorrect because it uses a NAT gateway, which is not a network configuration for data transfer. It also uses an overlay IP address as a target, which may cause routing conflicts or errors with the existing private connectivity to the VPC.

   
   

   https://docs.aws.amazon.com/sap/latest/sap-hana/sap-ha-overlay-ip.html

   https://docs.aws.amazon.com/sap/latest/sap-netweaver/cluster-configuration-prereqs-sap-netweaver-ha.html

   https://docs.aws.amazon.com/sap/latest/sap-hana/sap-oip-overlay-ip-routing-using-aws-transit-gateway.html

4. Question 4

   An SAP technology consultant needs to scale up a primary application server (PAS) instance The PAS currently runs on a c5a.xlarge Amazon EC2 instance The SAP technology consultant needs to change the instance type to c5a 2xlarge

   How can the SAP technology consultant meet this requirement?

   AStop the complete SAP system Stop the EC2 instance Use the AWS Management Console or the AWS CLI to change the instance type Start the EC2 instance Start the complete SAP system
   

   BWhile SAP is running use the AWS Management Console or the AWS CLI to change the instance type without stopping the EC2 instance
   

   CStop the complete SAP system Terminate the EC2 instance Use the AWS Management Console or the AWS CLI to change the instance type Start the EC2 instance Start the complete SAP system
   

   DWhile SAP is running log in to the EC2 instance. Run the following AWS CLI command: aws ec2 modify-instance-attribute --instance-id <INSTANCEID>
   --instance-type ''{\''Value\'': |''c5a.2xlarge1\''}''.
   

   Correct answer: A

   A is correct because stopping the complete SAP system and the EC2 instance is required to change the instance type to a larger size. Using the AWS Management Console or the AWS CLI to change the instance type is the easiest and fastest way to do so. Starting the EC2 instance and the complete SAP system will resume the normal operation. The other options are not correct or feasible for scaling up the PAS instance. Reference: https://docs.aws.amazon.com/whitepapers/latest/sap-on-aws-technical-deployment-guide/amazon-ec2.html https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-resize.html

   
   

5. Question 5

   A company is designing a disaster recovery (DR) strategy for an SAP HANA database that runs on an Amazon EC2 instance in a single Availability Zone The company can tolerate a long RTO and an RPO greater than zero if it means that the company can save money on its DR process.

   The company has configured an Amazon CloudWatch alarm to automatically recover the EC2 instance if the instance experiences an unexpected issue. The company has set up AWS Backint Agent for SAP HANA to save the backups into Amazon S3.

   What is the MOST cost-effective DR option for the company's SAP HANA database?

   ASet up AWS CloudFormation to automatically launch a new EC2 instance for the SAP HANA database in a second Availability Zone from backups that are stored in Amazon S3 When the SAP HANA database is operational perform a database restore by using the standard SAP HANA restore process.
   

   BLaunch a secondary EC2 instance for the SAP HANA database on a less powerful EC2 instance type in a second Availability Zone Configure SAP HANA system replication with the preload option turned off
   

   CLaunch a secondary EC2 instance tor the SAP HANA database on an equivalent EC2 instance type in a second Availability Zone Configure SAP HANA system replication with the preload option turned on
   

   DSet up AWS CloudFormation to automatically launch a new EC2 instance for the SAP HANA database in a second Availability Zone from backups that are stored in Amazon Elastic Block Store (Amazon EBS) When the SAP HANA database is operational perform a database restore by using the standard SAP HANA restore process
   

   Correct answer: A

   https://docs.aws.amazon.com/sap/latest/sap-hana/hana-ops-ha-dr.html#backint-hana-hadr