2026 Actual HP HPE7-A04 Dumps, Updated Exam Questions for Guaranteed Pass

HPE7-A04 free sample questions and answers

HP HPE7-A04 practice quiz with correct answers for search indexing.

1. Question 1

   What is the transit VLAN that runs between VSX members?

   AMust not be assigned IP addresses on any switch.
   

   BIt is used as a keepAlive mechanism
   

   CIt is a routed VLAN allowed in the ISL to ensure that the two switches within a VSX pair can learn routes from one another, in potential failover situations
   

   DMust be assigned identical IP address on both of the switches
   

   Correct answer: C

   
   

2. Question 2

   You are designing an overlay solution for two Data Centers based on the Aruba CX platform. Each Data Center has two rooms and each room is its own fabric. What is used for EVPN advertisements between data center rooms?

   ANot supported design
   

   BiBGP
   

   CStatic Routing
   

   DeBGP
   

   Correct answer: D

   
   

3. Question 3

   You want to implement distributed firewall policies that micro-segment VM-to-VM traffic, including within the VLAN and same host. The VMs should be able to send traffic on permitted TCP ports, but other traffic should be dropped (hosts are isolated). What are two requirements? (Select two.)

   ASVI 10 on the switch has IP local ARP proxy enabled on it
   

   BThe VMware host is configured to implement a local firewall
   

   CVLAN 10 is converted to a PVLAN on the switch only. The VMs are placed in an isolated VLAN
   

   DVLAN 10 is converted to a PVLAN on the switch and VMware hosts. The VMs are placed in an isolated VLAN
   

   Correct answer: A, D

   
   

4. Question 4

   In a multi-AS underlay design

   AAll spine switches are in the same AS while each leaf (VSX pair if used) are in their own AS
   

   BEvery spine and every leaf is in their own AS
   

   CAll spine and leaf switches are in one AS and the border leaf is in separate AS
   

   DEvery spine is in their own AS while all leaf switches in one AS
   

   Correct answer: A

   
   

5. Question 5

   You are setting up a single EVPN VXLAN fabric for a data center. A customer has one ESXi cluster in racks 1-3 that uses VLAN 10 for VMs in subnet 10.1.10.0/24. The customer has another ESXi cluster in racks 4-6 that uses VLAN 10 for VMs in subnet 10.2.10.0/24. Which is correct?

   AYou can map VLAN 10 to different VNIs on the same switches if you place VLAN 10 in multiple VRFs
   

   BYou must tell the customer to change the VLAN ID in racks 4-6 to a unique ID
   

   CYou can use subnets rather than VLANs for VNI mappings so you can use the same configuration everywhere
   

   DYou can map VLAN 10 to one VNI on switches in racks 1-3 and to a different VNI on switches in racks 4-6
   

   Correct answer: D