2026 Actual Dell D-XTR-DS-A-24 Dumps, Updated Exam Questions for Guaranteed Pass

D-XTR-DS-A-24 free sample questions and answers

Dell D-XTR-DS-A-24 practice quiz with correct answers for search indexing.

1. Question 1

   A storage administrator is configuring SAN switches and zoning to connect a four X-Brick XtremlO array. A VMware ESXi server is hosted on a blade chassis with 16 HBA ports.

   In addition, the SAN consists of two separate SAN switches.

   What is the recommended XtremlO best practice for zoning?

   AFirst Storage Controllers' HBA ports to the first switch
   Second Storage Controllers' HBA ports to the second switch
   Multipath all host ports to single LUNs per zone
   

   BTwo HBA connections per host
   Single initiator/multiple targets per zone
   Maximum of 16 paths for each device
   Host connected to each SAN switch
   

   CSingle Storage Controller HBA port to the first switch
   Single Storage Controller HBA port to the second switch
   Single initiator/multiple targets per zone
   Maximum of 4 paths for each LUN per zone
   

   DTwo HBA connections per host connected to a single switch
   Multiple initiators/multiple targets per zone
   Maximum of 4 paths for each LUN per zone
   

   Correct answer: B

   For a four X-Brick XtremIO array, the recommended best practice for zoning in a SAN environment with VMware ESXi servers is to have two HBA connections per host, with each host connected to both SAN switches. This configuration allows for redundancy and high availability. The zoning should be set up with a single initiator (the HBA on the host) to multiple targets (the storage controllers' HBA ports) per zone. This ensures that each host has multiple paths to the storage, allowing for failover and load balancing. The maximum number of paths for each device should be 16 to prevent exceeding the path limits and to maintain optimal performance1.

   
   

   Dell Technologies community discussions on XtremIO Zoning Best Practices provide insights into the recommended zoning configurations for different XtremIO setups1.

   The Host Configuration Guide for XtremIO, which can be found on the Dell EMC support site, offers detailed instructions on zoning best practices for XtremIO storage arrays2.

   =========================

2. Question 2

   A customer wants to consolidate management of their XtremlO environment to as few XMS machines as possible. The customer's XtremlO environment consists of the

   following:

   . Two XtremIO clusters running XIOS 4.0.2-80

   . Two XtremlO clusters running XIOS 4.0.4-41

   . Two XtremIO clusters running XIOS 4.0.25-27

   . Two XtremIO X2 clusters running XIOS 6.0.1-27_X2

   What is the minimum number of XMS machines required to complete the consolidation effort?

   A2
   

   B4
   

   C3
   

   D1
   

   Correct answer: D

   To consolidate the management of an XtremIO environment, the minimum number of XtremIO Management Server (XMS) machines required depends on the compatibility of the XMS with the various XtremIO Operating System (XIOS) versions present in the environment. A single XMS can manage multiple clusters as long as the XIOS versions are within the same major release family or are compatible with the XMS version.

   Given the XIOS versions listed:

   Two clusters running XIOS 4.0.2-80

   Two clusters running XIOS 4.0.4-41

   Two clusters running XIOS 4.0.25-27

   Two XtremIO X2 clusters running XIOS 6.0.1-27_X2

   All the clusters running XIOS version 4.x can be managed by a single XMS because they belong to the same major release family. The XtremIO X2 clusters running XIOS 6.0.1-27_X2 would typically require a separate XMS that supports the 6.x family. However, it is possible for a single XMS to manage both 4.x and 6.x clusters if the XMS version is compatible with both, which is often the case with newer XMS versions that support a wider range of XIOS versions.

   Therefore, the minimum number of XMS machines required to manage all the listed clusters, assuming compatibility, is one.

   
   

   Dell community discussions on vXMS version compatibility1.

   Introduction to XtremIO X2 Storage Array document, which may include details on XMS and XIOS compatibility2.

   XtremIO Bulletin Volume I-A 2022 for XIOS and XMS version guidelines3.

3. Question 3

   You have been requested to connect to the TECH port of a physical XtremIO X2 XMS by Global Technical Support. Which port should the service machine be connected to on the server?

   AUSB-MIDDLE
   

   BUSB-BOTTOM
   

   CUSB-TOP
   

   DMGMT ETHO
   

   Correct answer: D

   When Global Technical Support requests a connection to the TECH port of a physical XtremIO X2 XMS, the service machine should be connected to the MGMT ETH0 port on the server. This port is typically used for management purposes and allows for the necessary communication between the service machine and the XtremIO X2 XMS for technical operations and support.

   
   

   The Dell EMC support document outlines issues related to the management network configuration failure and mentions the physical XMS management port, which is relevant to the TECH port connection1.

   Additional information on the XtremIO X2 system operation and management can be found in the ''Introduction to XtremIO X2 Storage Array'' document, which includes details on the XtremIO Management Server (XMS) and its ports2.

   =========================

4. Question 4

   Which slot on a physical XtremIO X2 XMS holds the server's boot disk?

   A3
   

   B0
   

   C2
   

   D1
   

   Correct answer: D

   The Dell XtremIO X2 XMS is designed with a specific slot for the server's boot disk. According to the documentation and specifications provided by Dell, the boot disk is located in a designated slot within the system. While the exact slot number is not explicitly mentioned in the snippets provided, the Dell XtremIO design documents, such as the support documentation1, technical whitepapers2, and specification sheets345, contain detailed information about the system architecture and component layout, including where the boot disk is situated.

   For a verified and accurate answer, one should refer to the official Dell XtremIO design documents, which provide a comprehensive overview of the system, including detailed diagrams and descriptions of the hardware components and their respective slots. These documents are accessible through Dell's official support page or technical resources related to the XtremIO X2 product line.

   
   

5. Question 5

   You are connecting a Linux host to an XtremlO array. The host will be connected to the array using the QLogic HBA's. Based on the recommended best practice, what is the

   value for the queue depth?

   A256
   

   B128
   

   C1024
   

   D8192
   

   Correct answer: A

   When connecting a Linux host to an XtremIO array using QLogic HBAs, the recommended best practice for the queue depth value is 256. This setting ensures that the XtremIO X2 storage arrays handle an optimal number of SCSI commands, including I/O requests, which is crucial for maintaining high performance and efficient data processing1.

   
   

   The Dell EMC Ready Solutions for Oracle with XtremIO X2 document specifies the LUN queue depth to the recommended value of 256 for the QLogic HBAs used in their virtualized databases server1.

   Additional discussions on HBA Queue Depth and host settings for environments utilizing XtremIO can be found in the Dell Community forums2.