2026 Actual Dell D-PST-MN-A-24 Dumps, Updated Exam Questions for Guaranteed Pass

D-PST-MN-A-24 free sample questions and answers

Dell D-PST-MN-A-24 practice quiz with correct answers for search indexing.

1. Question 1

   A Storage Administrator notices two fans in a Dell EMC PowerStore are faulted. What describes the system behavior in this circumstance?

   AAn increased fan speed signal is sent to the surviving fans and the system continues normal operations
   

   BUpon the second fan fault, all host I/O is terminated immediately and the PowerStore goes through the halt and vault process and shuts down
   

   CA five-minute timer starts upon the second fan fault and the system shuts down automatically after the timer expires
   

   DCPU clock speed is reduced by 50% to lower internal temperatures and the system continues normal operations
   

   Correct answer: A

   When two fans in a Dell EMC PowerStore system are faulted, the system's behavior is to send an increased fan speed signal to the surviving fans to compensate for the loss and continue normal operations. This is a part of the system's design to ensure redundancy and maintain cooling within operational parameters even when one or more fans are not functioning1.

   The system monitors the health of all fans continuously. If a fan fault is detected, the system will:

   Generate an alert to notify the administrator of the fault.

   Increase the speed of the remaining fans to prevent overheating.

   Continue to operate normally unless the temperature exceeds safe operating limits.

   The administrator should then take the following steps:

   Acknowledge the alert in the PowerStore Manager.

   Plan for the replacement of the faulted fans as soon as possible to restore full redundancy.

   Follow the replacement procedures as outlined in the Dell PowerStore Installation and Service Guide2.

   It is important to address fan faults promptly to ensure the long-term health and performance of the PowerStore system. The increased fan speed is a temporary measure to maintain operations until the faulted fans can be replaced.

   
   

2. Question 2

   What are the recommended number of network switches in a Dell EMC PowerStore T environment?

   A3
   

   B4
   

   C1
   

   D2
   

   Correct answer: D

   In a Dell EMC PowerStore T environment, the recommended number of network switches is two1. This recommendation is based on best practices for general network performance and high availability. Using two switches allows for redundancy and ensures that if one switch fails, the other can continue to handle the network traffic without interruption1.

   The use of multiple switches connected with technologies like Virtual Link Trunking (VLT) and Link Aggregation Control Protocol (LACP) or their equivalents is advised. Each PowerStore node should have connectivity to all linked switches to maintain high availability and optimal network performance1.

   For detailed network design and switch configuration recommendations, administrators should refer to the Dell PowerStore Networking Guide for PowerStore T Models and other official Dell documentation2. These resources provide comprehensive guidelines on setting up the network infrastructure to support PowerStore T systems effectively.

   
   

3. Question 3

   Under which condition does the Dell EMC PowerStore equipment in the rack require additional stability?

   AUnstable humidity
   

   BWhen shipping the system
   

   CLow temperatures
   

   DHigh temperatures
   

   Correct answer: B

   The Dell EMC PowerStore equipment in the rack requires additional stability when shipping the system.

   When preparing Dell EMC PowerStore equipment for shipping, it is crucial to ensure that the system is stable and secure to prevent any damage during transit.

   Additional stability measures might include securing the equipment within the rack using appropriate brackets, using pallets designed for shipping heavy equipment, and ensuring that the rack is properly balanced.

   The need for additional stability is not typically associated with environmental conditions such as humidity or temperature but is a standard precaution during the physical movement of the system to safeguard against vibrations, shocks, and impacts that can occur during shipping1.

   For detailed procedures and best practices regarding the shipping and handling of Dell EMC PowerStore equipment, it is recommended to consult the official Dell EMC PowerStore documentation or contact Dell EMC support.

   
   

4. Question 4

   How is a defective embedded module displayed in Dell EMC PowerStore Manager?

   ABlue with a faulted state
   

   BOrange with a faulted state
   

   COrange with an empty state
   

   DBlue with an empty state
   

   Correct answer: B

   In Dell EMC PowerStore Manager, a defective embedded module is displayed as orange with a faulted state. This color coding is used to indicate that there is a fault with the embedded module. The PowerStore Manager provides a visual representation of the system's health and status, and the color orange is typically associated with a warning or an issue that needs attention.

   The procedure for identifying and replacing a faulted embedded module involves using the PowerStore Manager to locate the faulted component. Once identified, the module displays an orange LED to indicate its faulted state. This is part of the system's design to help administrators quickly and easily identify components that require attention1.

   For detailed instructions on replacing a faulted embedded module or understanding the LED states for troubleshooting, you can refer to the PowerStore documentation provided by Dell, which includes comprehensive guides on handling such scenarios2.

   
   

5. Question 5

   What is the maximum number of base enclosures in a cluster when planning a Dell EMC PowerStore T installation?

   A3
   

   B1
   

   C4
   

   D2
   

   Correct answer: C

   The maximum number of base enclosures in a cluster for a Dell EMC PowerStore T installation is 4.

   When planning the installation of a Dell EMC PowerStore T cluster, it is important to consider the scalability of the system.

   The PowerStore T series allows for clustering of multiple appliances to increase capacity and performance.

   According to the Dell PowerStore: Clustering and High Availability document, there is a minimum of one PowerStore appliance and a maximum of four PowerStore appliances that can be configured in the cluster1.

   This means that for a PowerStore T installation, you can start with a single appliance and scale up to a total of four appliances in a cluster as needed1.

   For detailed information on clustering and high availability features of the Dell EMC PowerStore T series, you can refer to the official Dell documentation1.