2026 Actual Dell D-RP-OE-A-24 Dumps, Updated Exam Questions for Guaranteed Pass

D-RP-OE-A-24 free sample questions and answers

Dell D-RP-OE-A-24 practice quiz with correct answers for search indexing.

1. Question 1

   Why is Image Access instantaneous when testing a copy with XtremlO arrays?

   AXtremlO completes the copy 'roll back' as a background task
   

   BRecoverPoint performs initialization based on the DIFF result
   

   CRecoverPoint uses XtremIO synchronous Snap-based replication
   

   DNo rolling forward or backward of the Journal is required
   

   Correct answer: D

   When using XtremIO arrays with RecoverPoint, Image Access is instantaneous because there is no need to roll the Journal forward or backward. This is due to the way XtremIO handles snapshots, which are used by RecoverPoint during the Image Access process:

   Snapshot Creation: XtremIO creates snapshots very efficiently, without the need for a full copy of the data. These snapshots are pointer-based, meaning they reference the original data without duplicating it.

   Instant Access: When Image Access is initiated, RecoverPoint can immediately present a snapshot to the host because it's simply a matter of accessing the pointers to the existing data, rather than having to roll data forward or backward in the Journal.

   Continuous Replication: Even while Image Access is in use, replication and distribution continue unaffected, ensuring that protection of the production data is maintained1.

   This capability is part of what makes XtremIO an effective storage solution for environments requiring rapid access to multiple data points for testing, development, or recovery purposes1.

   
   

2. Question 2

   A storage administrator is selecting Test a Copy to enable an Image Access for an XtremIO-to-XtremIO Consistency Group. Why is Logged Access the only allowable access

   mode with this type of replication?

   AXtremlO uses snapshots which are instantly promoted as the SCSI personality of the copy
   

   BXtremlO cannot process the changes to the Journal required for Virtual Access
   

   CXtremlO snapshots are not host accessible when using RecoverPoint
   

   DDirect Access is not possible because the copy cannot be mounted on XtremIO
   

   Correct answer: A

   Snapshot Technology: XtremIO arrays use snapshot technology that allows for quick access to data at a specific point in time.

   Logged Access Mode: When using RecoverPoint with XtremIO arrays, Logged Access mode is used because it leverages the snapshot capabilities of XtremIO.

   Instant Promotion: The snapshots created by XtremIO are instantly promoted as the SCSI personality of the copy, making them immediately accessible to the host.

   Efficiency: This process is efficient because it does not require the Journal to roll forward or backward, which would be necessary for other access modes like Virtual Access.

   This capability is part of what makes XtremIO an effective storage solution for environments requiring rapid access to multiple data points for testing, development, or recovery purposes12.

   
   

3. Question 3

   A storage administrator has one production site and one remote site. The administrator configured the RecoverPoint with VNX(SE) cluster at both sites. The current environment

   has two Consistency Groups configured with two copies each; one production copy and one remote copy. Based on the company's growing business requirements, the

   administrator has been asked to keep a local copy of the production data.

   Which action should occur in order to meet this requirement?

   ARecoverPoint with VNX(SE) does not support more than two copies in a single Consistency Group
   

   BDelete and reconfigure the existing Consistency Group for a local and remote replication
   

   CAdd a copy into the existing Consistency Group for a local replication
   

   DUpgrade the RecoverPoint with VNX(SE) license to RecoverPoint/EX and then reconfigure the Consistency Group
   

   Correct answer: C

   To meet the requirement of keeping a local copy of the production data in a RecoverPoint environment with VNX(SE) clusters, the administrator can add a local copy into the existing Consistency Group. This action does not require deleting and reconfiguring the existing Consistency Group or upgrading the license. Here are the steps:

   Access Unisphere for RecoverPoint: Log into the Unisphere interface for RecoverPoint management.

   Navigate to the Consistency Group: Find the Consistency Group that needs the local copy.

   Add a Local Copy: Use the option to add a copy into the selected Consistency Group.

   Configure the Local Copy: Specify the settings for the local copy, such as the Journal volume and RPO settings.

   Apply Changes: Save the changes to implement the local replication.

   This process allows the administrator to enhance the data protection strategy by adding a local copy for operational recovery or other business needs without disrupting the existing remote replication setup1.

   
   

4. Question 4

   An application protected by RecoverPoint has spanned onto a second XtremlO system. How can this application continue to be protected by RecoverPoint?

   ACreate another Consistency Group and define group sets with periodic parallel bookmarks
   

   BEncapsulate the application volumes using VPLEX and use the VPLEX splitter
   

   CExtend the existing Consistency Group onto the second XtremIO system
   

   DReconfigure the existing Consistency Group to be a Distributed Consistency Group
   

   Correct answer: D

   When an application protected by RecoverPoint spans onto a second XtremIO system, it is necessary to ensure that the protection extends across both systems. The appropriate action in this scenario is to reconfigure the existing Consistency Group to be a Distributed Consistency Group. This allows for the inclusion of multiple storage systems under the same protection umbrella, ensuring that all parts of the application, even those that span multiple systems, are consistently protected1.

   A Distributed Consistency Group in RecoverPoint is designed to maintain synchronous or asynchronous replication across different arrays, which may be geographically dispersed. This ensures that write operations are captured and replicated in a manner that maintains the consistency of the application data, regardless of the underlying storage system1.

   For detailed guidance on configuring Distributed Consistency Groups and extending protection to additional storage systems, it is recommended to refer to the official Dell RecoverPoint documentation or contact Dell EMC support for assistance tailored to the specific configuration and version of the RecoverPoint system being used1.

   
   

5. Question 5

   A database team is performing tests against a PIT copy of dat

   a. Their write activity is going to exceed the currently allocated amount of space dedicated to Image Access mode.

   What should be done to allow testing to continue without disruption to their testing?

   ANavigate to Protection > Manage Protection > Select the CG from the list and select the copy.
   Click Edit Journal, and add one or more additional Journal volumes.
   

   BUse the config_copy_group= copy= policy image_access_log_size= CLI command
   

   CExpand the Journal volume using native array tools.
   Navigate to Protection > Manage Protection > Select the CG from the list and select the copy.
   Click Edit Journal, and then select 'Expand Journal'.
   

   DNavigate to Protection > Manage Protection > Select the CG from the list and select the copy.
   Click Edit, and then increase the reserved image access percentage from 20%
   

   Correct answer: A

   When the database team's write activity is expected to exceed the space allocated for Image Access mode in RecoverPoint, additional Journal volumes need to be added to accommodate the increased write activity. This can be done through the Unisphere for RecoverPoint interface:

   Navigate to Protection: Access the Protection menu in the Unisphere for RecoverPoint.

   Manage Protection: Go to the Manage Protection section.

   Select the Consistency Group (CG): Choose the appropriate CG from the list.

   Select the Copy: Click on the copy that is being used for the Point-in-Time (PIT) testing.

   Edit Journal: Click on the Edit Journal option.

   Add Journal Volumes: Add one or more additional Journal volumes to ensure there is enough space for the write activity during the testing periD.

   By adding additional Journal volumes, the database team can continue their testing without disruption due to space limitations in the Image Access mode1.