Dell EMC D-PDD-DY-23 Exam Dumps

To configure DD Boost, enable it, create a new user, and set up a storage unit in the DD System Manager, follow these steps:

Enable DD Boost:

In the Protocols section on the left sidebar, locate DD Boost and click on it.

Inside the DD Boost settings, find the option to enable DD Boost if it's currently disabled.

Create a New User:

Go to Administration or Users (location varies based on version).

Select Add User or New User.

Set the username as ddboost and the password as Password123.

Assign the appropriate permissions, typically Admin or Read/Write access, based on best practice recommendations for DD Boost users.

Create a Storage Unit:

Return to the DD Boost section.

Look for an option labeled Storage Units or similar, and choose Add Storage Unit.

Name the storage unit SU1.

Ensure that the newly created ddboost user has access to this storage unit.

Save and Confirm:

After configuring, save all settings and confirm the changes.

Verify that DD Boost is enabled, the user ddboost exists with the specified permissions, and the storage unit SU1 is created and accessible by this user.

This completes the setup for DD Boost with a new user and storage unit on PowerProtect DD. Let me know if you need more assistance with any of these steps.

In the DS60 storage shelf, slots are organized into columns and rows for easy identification. The columns are numbered from 0 to 9, indicating 10 slots in total, while the rows are labeled from A to F, indicating 6 rows. This identification scheme helps administrators manage and organize the physical components of the storage system effectively.

The system show performance command provides an overview of the overall system performance statistics on the PowerProtect DD appliance. This includes key performance metrics such as throughput, IOPS, and other indicators that help in monitoring and diagnosing the system's operational performance.

Each PowerProtect DD system can support up to two Cloud Tiers. Therefore, with three PowerProtect DD systems, the maximum number of Cloud Tiers is calculated as follows:

2 Cloud Tiers per PowerProtect DD system 3 PowerProtect DD systems = 6 Cloud Tiers total.

This configuration allows the administrator to utilize multiple cloud providers efficiently across the consolidated PowerProtect DD systems.

To configure a new MTree with a specified path and size limit in PowerProtect DD, follow these steps:

Step 1: Access the MTree Management Section

In the DD System Manager interface, locate Data Management in the sidebar.

Select MTree from the dropdown menu to manage MTrees.

Step 2: Create a New MTree

Click on Create MTree or Add MTree (the exact button label may vary).

Set the Path for the MTree as /data/col1/oracle.

Step 3: Set the MTree Size Limit

In the MTree creation dialog, look for an option to set a Quota or Size Limit for the MTree.

Set the Size Limit to 200 TiB to ensure the MTree does not exceed this capacity.

Step 4: Save the Configuration

Confirm and save your settings to create the MTree with the specified path and size restriction.

After these steps, you should have a new MTree at /data/col1/oracle with a maximum allowed size of 200 TiB. Let me know if further assistance is required!